Need Help, Talk to Expert : (619) 880-5508

Working Hours : Everyday (6am - 11pm)

A gas stove is one of the most reliable kitchen appliances, offering precise heat control and efficiency that makes cooking easier. However, like any other appliance, it can develop issues over time. One common problem homeowners encounter is a gas stove igniter that won’t stop clicking. While the igniter is supposed to spark briefly to light the burner, constant clicking usually signals an underlying issue that needs attention. Two of the most frequent causes are a dirty igniter or moisture in the switch. Understanding these problems can help you decide whether simple cleaning will solve the issue, or whether it’s time to call in professional repair services.

Why Does the Gas Stove Igniter Click?

When you turn the knob on a gas stove, the igniter generates a spark to ignite the gas. Once the flame is established, the clicking sound should stop. If the clicking continues, it means the igniter is still trying to spark, even though the burner is already lit—or sometimes, even if no gas is present. This repetitive clicking can be annoying and could also lead to wear on the igniter mechanism over time.

Common Cause #1: Dirty Igniter

The most common reason for a clicking igniter is dirt, grease, or food residue blocking the spark. Over time, spills and splatters accumulate around the burner and igniter tip, creating a barrier between the spark and the gas. Even a small amount of grime can prevent the igniter from working properly.

To address this issue:

  1. Turn off power and gas supply before cleaning. 
  2. Remove the burner cap and wipe away any debris. 
  3. Use a soft brush or a cotton swab dipped in rubbing alcohol to clean around the igniter tip. 
  4. Allow the area to dry completely before reassembling. 

Regular cleaning not only prevents constant clicking but also ensures your stove performs efficiently and safely.

Common Cause #2: Moisture in the Switch

Another frequent culprit is moisture trapped in the stove’s ignition system. Moisture can enter the igniter switch due to spills, boiling pots overflowing, or excessive cleaning with water. Once inside, moisture interferes with the switch’s ability to signal properly, causing continuous clicking even when the burner is off.

In many cases, the problem resolves once the moisture dries out naturally. To speed up the process, you can:

  • Leave the stove unused for several hours or overnight. 
  • Use a hair dryer on a low setting to gently dry the affected area. 
  • Avoid excessive water during future cleanings to reduce the risk of recurrence. 

When Cleaning Doesn’t Help

If cleaning the igniter or allowing moisture to dry doesn’t solve the issue, the problem may be more serious. A faulty igniter switch, damaged wiring, or malfunctioning spark module could be to blame. These components require professional inspection and repair, as handling electrical and gas connections without proper expertise can be hazardous.

Preventing Future Clicking Problems

To minimize the risk of igniter issues in the future, follow these maintenance tips:

  • Wipe spills immediately to prevent food or liquid from seeping into the igniter area. 
  • Clean burners regularly with non-abrasive tools. 
  • Avoid using excessive amounts of water when cleaning the stovetop. 
  • Schedule periodic professional inspections to ensure all components are functioning safely. 

Why Professional Repair Matters

While simple cleaning may fix the issue, persistent clicking can point to deeper electrical or gas-related problems that should never be ignored. An igniter that won’t stop clicking could eventually fail to light the burner at all, leaving you without a functioning stove. In rare cases, faulty ignition components can even pose safety risks if gas accumulates without being ignited.

Professional technicians can quickly identify whether the problem lies in the igniter, switch, or spark module, and provide safe, lasting repairs. Attempting to fix electrical and gas systems without the right expertise can lead to further damage or safety hazards.

A gas stove igniter that keeps clicking is more than just an annoyance—it’s a sign that something isn’t working correctly. In many cases, the problem can be solved by cleaning the igniter or letting moisture in the switch dry out. However, if the issue persists, it’s best to call a trusted repair service for professional assistance.

If your gas stove igniter won’t stop clicking and basic troubleshooting hasn’t solved the issue, don’t wait until the problem worsens. Contact Chula Vista Appliance Repair Company for expert service. Our skilled technicians are trained to diagnose and repair all types of stove issues, ensuring your appliance works safely and efficiently. Call us today to schedule a convenient service appointment and restore peace to your kitchen.

 

Contact us

(619) 880-5508

Go To Top