Kenmore Cooktop Repair

Cooktops have lately deservedly gained high popularity among hostesses. But regardless of type, manufacturer, or proper care, cooktops unfortunately do occasionally malfunction. The experts at our Chula Vista Appliance Service Center repair cooktops, glass ceramic cooktops, gas cooktops, and induction cooktops at home or in the service center shop. We perform quality Kenmore Cooktop Repair in San Diego County.

Our company has been in business since 2008. Our team of skilled Kenmore Cooktop Repair and Service technicians have over 15 years of experience. Cooktops are mainly: ceramic or glass ceramic coated induction cooktops, electric, gas cooktops. Induction cooktops - heat only the cookware and the cooking area itself is almost cold.

Temperature and power can be adjusted from minimum to maximum. Gas cooktops are complicated and explosive equipment. Service will be performed by our Kenmore Cooktop Repairs technicians.

Major causes and errors in cooktop operation

Noise when the induction cooktop is running

Cause: Induction heating sends electric waves to the bottom of the cookware, which causes its surface to vibrate.

Remedy: This is a normal operating noise and does not indicate any malfunction.

Unpleasant, low sound like that of a transformer

Cause: A burner is operating at a high-power level.

Remedy: Reduce the heating level or turn off the cooking zone. This malfunction will be corrected by Kenmore Cooktop Repair and Service.

Cookware vibration or crackling

Cause: this noise is created by cookware made of layers of different materials.

Remedy: replace the cookware or change the product that is being cooked in it. As unbelievable as it may sound, the type of product is also one of the factors affecting the sound made by the panel.

Fan noise

The reason: all induction cooktops have a fan that cools the hob and its parts. Depending on the degree of heating and the number of cooking zones in operation, the noise level also depends on it.

Remedy: even after the unit is turned off, the fan will work to cool the hot parts. Our technician will provide Kenmore Cooktop Repair.

Sensors do not respond to touch and other actions

Cause: system failure or overheating due to prolonged operation.

Remedy: Unplug the hob for a few minutes, then plug it back in and press the on/off key.

Sensors do not respond well

Cause: the hob is dirty/powerful external flashing light.

Remedy: Clean the panel and check that it is dry/eliminate the source of external light or place the panel out of its reach. Sensor replacement is best left to a trusted Kenmore Cooktop Repair and Service technician.

The panel turned off by itself and an unfamiliar message appears on the display

Cause: the device is dirty/water spilled/ there is a foreign object on the surface.

Remedy: Clean the surface, wipe it with a dry cloth/remove any excess material from the cooktops.

Electric cooktop

The cooktops shut off

Cause: all burners are set to heating level 00/the control panel is dirty, water spilled, or a foreign object is on the cooktop.

Remedy: If none of the burners is set to heat, it shuts down, clean the cooktop, and wipe it with a dry cloth, removing the object.

Sensors do not respond to pressing

Cause: overheated cooktops, dirty, etc.

Remedy: Unplug the unit, wait a few minutes, and plug it in again. Our Kenmore Cooktop Repair specialists will solve the problem in no time.

All the above errors as a rule do not pose a particular threat to the device and the person. But as practice shows, the main cause of their occurrence is neglect of care of the panel and not reading the manual after purchase. But if your cooktop is out of order, the right solution is to have the unit diagnosed in the Chula Vista Appliance Service Center by our specialist. A cooktop is a complex household appliance and repairing it yourself can cause the appliance to deteriorate. The qualified experts at Kenmore Cooktop Repair and Service can solve your problem quickly.