Need Help, Talk to Expert : (619) 880-5508

Working Hours : Everyday (7am - 10pm)

Ordering the repair of washing machines, people often indicate the reason “just does not turn on. But this “diagnosis” allows only to narrow down the list of possible faults. To carry out a complete diagnosis will have to in any case. Only in this way, it will be possible to identify the real cause of the inoperability of the unit and reliably eliminate the problems found.


At the same time, users can do the basic diagnostics by themselves. But such a step will only save time masters because in most cases, the repair of washing machines will require the use of special tools, and in some cases and replacement of parts of specific mechanisms.



If the machine does not turn on (there is not even an indication), it is necessary to make sure that the socket is working. It is enough to connect another electrical appliance to it. If everything is okay with the socket, then you need to pay attention to the power cord.


It is necessary to test the contacts, check the integrity of the wires, as well as to measure the actual voltage at the surge protector (there are 4 contacts: two should come to 220V, with two out of a similar voltage).


If a fault is detected, it must be eliminated. If all indicators are normal, it is worth checking the electronic control unit. Although it is rather difficult to do it at home. It is better to immediately contact a service center and order the repair of washing machines.


Repair of washing machines in the presence of indication

If the machine gives “signs of life”, but the washing process is not activated by pressing the appropriate buttons, then you need to check the correctness of the water supply. First, you should make sure that water is present in the house at all, and then check that the faucet is open and water is coming to the washing machine. You should also make sure that the hose is not crushed, and check the functionality of the filling valves.


In addition, it is necessary to diagnose the power button, first removing the back cover. It is also necessary to make sure that the hatch lock works. To do this, you will need a special tester. If the problem is not detected, then you should focus on the electronic control unit.


Ideally, you should not try to figure out the issue yourself. It is better to immediately have the washing machine repaired in Chula Vista handled by the professionals at Chula Vista Appliance Repair Company. Such a step will help to avoid accidental errors and repair the technique in the shortest possible time.


Contact us


(619) 880-5508

Go To Top