Payne Furnace Repair

The main purpose of the gas furnace - space heating and water heating for domestic needs. The boiler is able to fulfill this purpose by burning gas at the burner. In modern gas furnaces, the burner ignition is automatic due to auto ignition. If you have a problem with your furnace, contact the Chula Vista Appliance Service Center. The technicians at Payne Furnace Repair in San Diego County will fix and service it quickly.

Our company has been in the business of repairing gas furnaces since 2008. Our Payne Furnace Repair and Service technicians have over 15 years of experience.

The main reasons

Why the furnace clicks but doesn't ignite

During its normal operation, the furnace does not make extraneous noises, on the contrary, it is able to work quietly, maintaining a comfortable environment in the home. However, if any malfunction occurs, the normal operation of the gas furnace is disturbed, we can hear a variety of clicks, which may have a different nature, sometimes not at all similar to the clicks of automatic ignition. 

At the same time, the clicks may be accompanied by absence of flame on the burner and inability to ignite. Contact Payne Furnace Repairs for all malfunctions.

The main reasons why the furnace snaps:

• There is not enough water in the system.
• Low pressure in the system.
• Layer of scale on the walls of the heat exchanger.
• Consequences of factory defects.
• Natural wear and tear of the components.
• High pressure in the pump.
• Failure of the fan.
• Faulty installation of the equipment.

Some causes of clicks are not related to the burner, however, there are many electronics and sensors in the gas furnace which can block the ignition, if a malfunction or error is detected during the operation of the equipment.

Not enough water in the system

Due to the fact that there is not enough water in the system, the so-called air congestion is formed. Air in the system heats up faster than water, it leads to overheating, which causes the system to shut down and the furnace no longer ignites. In the process of overheating, the user may hear an extraneous noise, similar to whistles or clicks. Payne Furnace Repair and Service will fix this problem.

Low pressure in the system

The normal pressure in the gas furnace system is two atmospheres. If the pressure becomes lower than normal, the user will hear a sound that resembles loud clicks, sometimes a sound similar to a whistle. The electronic component of the gas furnace, including Payne Furnace systems, will definitely block its operation, and the boiler will not ignite or continue its operation. In such cases, it is crucial to have a professional technician perform the necessary repairs. 

If you require Payne Furnace Repair Near You, our experienced technicians are equipped with the knowledge and skills to diagnose and resolve any issues with your system, ensuring proper functionality and efficient operation. Trust our reliable service to address any problems with your Payne Furnace and restore its performance.

Once the low pressure is confirmed, the furnace system should be checked for leaks and damage in the form of micro-cracks. This involves removing all water from the system and blowing it out with a compressor. If there are damages or microcracks, air under pressure will leak from them with a characteristic sound. The damage must be sealed, and the system must be refilled with the required amount of water. These repairs will be performed by Payne Furnace Repair.

Layer of scale on the walls of the heat exchanger

To fix the problem, it is necessary to clean the system with chemicals and have the heat exchanger decalcified. This service will be performed by our Payne Furnace Repair and Service technicians.

Consequences of a factory defect

If your furnace snaps and doesn't light up within the warranty period, you should not take independent action to repair the equipment, you should contact Payne Furnace Repair Service.

Installation and first start-up of any appliance is a very important stage, on which its stable and correct operation directly depends. This statement is especially relevant in the case of gas equipment. A representative from an authorized Chula Vista Appliance Service Center should handle the installation of your gas furnace. Payne Furnace Repair and Service technicians will quickly fix and perform service.