Need Help, Talk to Expert : (619) 880-5508

Working Hours : Everyday (6am - 11pm)

CVR 19 09

19
September

Wolf Gas Range Oven Temperature Is Inaccurate — Possible Temperature Sensor or Electronic Control Board Failure

An inaccurate oven temperature can turn a Wolf gas range into a source of constant frustration. You set the oven to 350°F, but food comes out undercooked. You increase the temperature, and suddenly the outside is burning while the center remains raw. In other cases, the oven may appear to work normally but fluctuate far […]

CVR 17 09

17
September

KitchenAid Dishwasher Detergent Dispenser Won’t Open — Possible Dispenser Mechanism or Control Board Problems

A KitchenAid dishwasher can complete a cycle while leaving the detergent sitting inside the dispenser. When the dispenser door does not open at the correct point in the wash cycle, dishes may come out dirty, greasy, or covered with food residue. The problem can be caused by a mechanical issue inside the dispenser, an electrical […]

CVR 15 09

15
September

Samsung Induction Cooktop Detects the Pan but Stops Heating — Possible Overheating Sensor or Power Module Failure

A Samsung induction cooktop that detects a pan but stops heating can be difficult to diagnose because the appliance may initially appear to work correctly. The control panel responds, the burner recognizes suitable cookware, and the display may show that heating has started. However, after a short period, the cooking zone stops producing heat or […]

CVR 13 09

13
September

Jenn-Air Gas Range Burner Keeps Clicking After Ignition: Moisture or Spark Switch Problems

A Jenn-Air gas range burner should produce a clicking sound while the ignition system is creating a spark. Once the burner lights and the flame is established, that clicking should normally stop. If the igniter continues clicking even though the burner is already lit, the range may have a problem with moisture, the spark switch, […]

CVR 11 09

11
September

Bosch Washing Machine Makes a Loud Noise During Spin — Possible Bearing or Drum Support Failure

A Bosch washing machine that suddenly becomes loud during the spin cycle should not be ignored. Some washing machines naturally produce more noise when the drum reaches high speed, but a loud grinding, rumbling, banging, or roaring sound can indicate a mechanical problem. One of the more serious possibilities is a worn drum bearing or […]

Go To Top